Thread: Backlash. Anyone try this?
Results 1 to 5 of 5
-
12-09-2019, 02:26 AM #1
- Join Date
- Nov 2019
- Posts
- 87
Backlash. Anyone try this?
-
12-09-2019, 02:56 AM #2
Registered
- Join Date
- Aug 2016
- Posts
- 132
Re: Backlash. Anyone try this?
Plenty of people have done it. No different than vanilla LinuxCNC.
-
12-10-2019, 07:40 AM #3
- Join Date
- Nov 2019
- Posts
- 87
Re: Backlash. Anyone try this?
If you watch the video, he references a line with 20% in it. Nothing like available with the latest software .ini file. I tried it anyways and it failed and reverted to a previous version and I had to reinstall the latest.
It probably wouldn't be a big deal if you could always start moves in the same direction(s), but when cutting a wide groove in the middle of a part and it moves back towards the positive Z, that little bit of backlash leaves a mark. It would be nice to get rid of it.
-
12-10-2019, 08:28 AM #4
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: Backlash. Anyone try this?
Another method is to just eliminate the backlash in the system
Jim Dawson
Sandy, Oregon, USA
-
12-10-2019, 07:34 PM #5
- Join Date
- Nov 2019
- Posts
- 87
Re: Backlash. Anyone try this?
That would be nice.
Reply With Quote
Similar Threads
-
Spiral anti-backlash couplers introducing backlash!
By MArruda in forum DIY CNC Router Table MachinesReplies: 22Last Post: 06-07-2011, 08:31 AM -
Backlash Compensation / Backlash
By dwessels in forum Benchtop MachinesReplies: 58Last Post: 02-23-2009, 05:27 PM -
Backlash or motor tuning problem? How do I test for backlash?
By Brian Queen in forum Mach MillReplies: 8Last Post: 03-10-2008, 09:35 PM -
Servo idea - elimated backlash - zero backlash !
By synthetiklone in forum Linear and Rotary MotionReplies: 6Last Post: 12-06-2006, 08:35 PM -
Backlash
By Ed_R in forum DIY CNC Router Table MachinesReplies: 16Last Post: 03-17-2006, 08:30 AM
Tags for this Thread
Posting Permissions
