518,160 active members
2,523 visitors online
Register for free
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > MILLING > Replacement Program for NC Studio
Results 1 to 1 of 1
  1. #1
    Join Date
    May 2014

    Replacement Program for NC Studio

    Hello. I am glad to find this forum! My name is Randy.
    I bought a mill from China several years ago without knowing how to run one. It has not worked out well. I have had a lot of trouble with the controller, NC Studio.
    I have three servo-drives, not stepper motors. It has a hand control with it. The spindle is rated up to 28000 RPM. It has a tool touch-off, but I have never used it. It is a manual tool change.
    I have come to the decision to try to just upgrade the machine to a more user friendly, and widely used program. I am here to ask for suggestions.
    I would also like advice on what I would have to do to make the conversion. I know I am a newby here and I readily admit I do not know what I am doing, so any advice will be greatly appreciated. I am just tired of stressing over a machine that I cannot use.
    Thank you in advance.

  2. #2
    Join Date
    May 2014

    Re: Replacement Program for NC Studio

    I am sorry I posted this in the wrong location. Any help will be appreciated.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts