Hi.
I will get a new router soon.
The machine is equipped with 4 JMC NEMA 24 motors.
Now the supplier asks me which parameters he should set the drivers to.
JMC iHSS60 Integrated Closed-Loop-Stepper - 3Nm stepper motor, Nema 24
- including parameterization according to customer requirements
e.g. for Eding CPU5A4E
Because I don't use "Eding-CNC", my question is whether there are any parameters that should be set.
I using the MNK 3/9 controller with TNGv2
Results 1 to 3 of 3
-
12-15-2019, 06:31 PM #1
- Join Date
- Nov 2015
- Posts
- 260
Parameters for JMC iHSS60 whit MK3/9
-
12-15-2019, 09:28 PM #2
Moderator
- Join Date
- Mar 2017
- Posts
- 1304
Re: Parameters for JMC iHSS60 whit MK3/9
Parameters must match machine. It is not important which controller is used.
-
12-15-2019, 10:14 PM #3
- Join Date
- Nov 2015
- Posts
- 260
Re: Parameters for JMC iHSS60 whit MK3/9
OK, I thought so. I will pass it on, thank you.
Reply With QuoteSimilar Threads
-
Error Pin and the JMC iHSS60 Close Loop Motor Alarm Signal
By tantemay in forum PlanetCNCReplies: 2Last Post: 11-28-2019, 03:28 PM -
problem whit parameters
By jarl85 in forum FanucReplies: 3Last Post: 08-01-2015, 02:36 AM -
Problem whit RPM
By pdmore in forum SIEMENS -> GENERALReplies: 0Last Post: 03-31-2014, 03:29 PM -
Old CnC whit AC motors
By i_spyder in forum Servo Motors / DrivesReplies: 0Last Post: 07-12-2009, 01:24 AM -
Help whit ini Metric
By essa in forum LinuxCNC (formerly EMC2)Replies: 2Last Post: 04-13-2006, 08:19 PM
Tags for this Thread
Posting Permissions
