584,860 active members*
5,011 visitors online*
Register for free
Login
IndustryArena Forum > Material Technology > Glass, Plastic and Stone > Help selecting diamond coated burrs for cutting glass
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2006
    Posts
    37

    Help selecting diamond coated burrs for cutting glass

    I need to cut a profile of about 34 linear inches around an ovoid in 3/16" mirror glass. I had heard of using diamond coated burrs with lots of coolant and a slow speed. So I tested it and it works with only very, very small micro fractures on the edge. Question though, is where to get high quality burrs as those that I have are the cheap asian type from a kit of several. I looked in MSC and couldn't find anything that stood out. I don't want to have to worry about the burr failing during the cut.

    Thanks, I haven't been here in a long time...

  2. #2
    Join Date
    Mar 2019
    Posts
    12

    Re: Help selecting diamond coated burrs for cutting glass

    Try scomac.

Similar Threads

  1. Replies: 0
    Last Post: 08-28-2014, 12:10 PM
  2. Sources for long-shank Burrs for foam cutting?
    By Deltic_Engine in forum Material Machining Solutions
    Replies: 2
    Last Post: 06-28-2012, 02:07 AM
  3. Solid Carbide And Coolant Through Diamond Like Coated Drills
    By CDTooling in forum News Announcements
    Replies: 0
    Last Post: 09-08-2010, 06:31 PM
  4. 1/4" dia. diamond coated files?
    By SkipW in forum Want To Buy...Need help!
    Replies: 14
    Last Post: 11-25-2009, 02:59 PM
  5. DIAMOND BITS for glass engarving
    By metalikha joel in forum MetalWork Discussion
    Replies: 3
    Last Post: 07-28-2007, 04:03 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •