[Redcedar]

Hi Guys.

I need to get a new grease fitting for the right z-axis truck.
They are chrome colored and have a right angle bend.
The same fittings are used throughout the machine.

Are they M4 or M6?
If they are M6 I will order these ones from Avid CNC:

M6 Flush Mount Grease Fitting | Avid CNC | CNC Router Parts

Any help would be appreciated!

Thank you.
David

[Ntl]

Hi Guys.

I need to get a new grease fitting for the right z-axis truck.
They are chrome colored and have a right angle bend.
The same fittings are used throughout the machine.

Are they M4 or M6?
If they are M6 I will order these ones from Avid CNC:

M6 Flush Mount Grease Fitting | Avid CNC | CNC Router Parts

Any help would be appreciated!

Thank you.
David

No idea but I would put some calipers on one and Google the size. The machines have changed a few times and who knows if all the zerk fittings are the same.

[wmgeorge]

My early 2018 (May) just used standard off the shelf grease fittings. They are not expensive, just go purchase a couple and see if they fit. I think I paid like $4 for a package of 6 or so. !/4-28 is one US size and I am sure the metric sizes are pretty common also. If you have some Digital calipers use them of course.