584,879 active members*
4,975 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > BobCad Post Processors > Need Help with a variaxis post processor V32
Results 1 to 3 of 3
  1. #1
    Join Date
    Dec 2019
    Posts
    3

    Need Help with a variaxis post processor V32

    Hi guys I'm new to this site, have used bobcad for about 5 years. We recently upgraded to 5 axis software in v32. And I am having a hell of a time getting the machine definition and post processor to work worth anything. I have been working with bobcad for almost a month to get it ironed out and we haven't gotten very far. I could really use any help anyone can provide. It's a variaxis 500 5x with a fusion 640m control.

  2. #2
    Join Date
    Jun 2008
    Posts
    1838

    Re: Need Help with a variaxis post processor V32

    First of all what are your issues??

    What is the Axis configuration? is it the usual X,Y and Z axis with a trunion C axis and a 360 degree rotational A axis, or is the Trunnion set up as a B axis ??

    Regards
    Rob

  3. #3
    Join Date
    Dec 2019
    Posts
    3

    Re: Need Help with a variaxis post processor V32

    x, y, z, trunnion c, and +30 -120 a axis. We are working to develop a post processor. And i think we're finally getting somewhere. Im just having issues with fixture offset stuff at this point (g54.2P_)

Similar Threads

  1. Replies: 1
    Last Post: 01-02-2021, 11:05 PM
  2. Replies: 0
    Last Post: 02-17-2018, 07:10 PM
  3. PP - Variaxis 630-5x II
    By age_cph in forum EdgeCam
    Replies: 4
    Last Post: 11-23-2012, 12:39 AM
  4. nx post for mazak variaxis 630
    By fmc575 in forum UG NX
    Replies: 3
    Last Post: 02-23-2011, 06:27 PM
  5. Mazak Variaxis 5-axis Gibbs CAM post 640 Fusion
    By btdmfg in forum Mazak, Mitsubishi, Mazatrol
    Replies: 1
    Last Post: 01-18-2009, 05:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •