Hi, Is there Easy modelling manual
thanks
Hi, Is there Easy modelling manual
thanks
hi, i guess not ... if you wish, talk with your okuma rep ( or whoever else ), so to remotely set 2-3 different tools, fixtures, etc, and screen-record the session
when using a normal spindle, parts for such big machines are generally too simple to require easy modelling, considering that there is an experienced operator
when using the pivot spindle, in most cases, is good to cam simulate / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
If memory serves correctly easy modeling directions are part of the operation manual. What model of control do you have?
hy bbgun, you are correct i was searching for 'modelling' instead of 'modeling'
just like you said, main explanations are inside the operation manual, but also there are references inside other manuals
mcr-b2, do you have the manuals in pdf format on your machine ? if you wish, i may sent you infos from my manuals / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
I have the manuals. Glad you were able to find it.
Hi friends With your information I found i? in Operation Manual. Correction: Easy modeling not Easy Modelling::cheers:
Merry Christmas and happy new year
modeling vs modelling : same word , same meaning. The variation in the spellings arose while searching for a distinctive language that would differentiate usa from british.
but why should one search for a new language ? is much easier to create one : M3 M003 M=MMM M = SQRT [ VC [ 0010 ] ] + 2
kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg
You are right
kindly :