Hi everyone, I have one question that I hope will solve my problem. Eight years ago, I built a very elementary plasma table. Then I used a Chinese CUT-50 and controller MACH3. The problem was that the g-code had to be edited every time. Each time I write in the code, when the plasma starts and when it stops. The speed with which to cut, as well as the arcs with which the cutting begins. It takes me a lot of work and time. Anyway, I've already built a really good table. So my question is: what kind of controller to use. When I place a DXF file, read it and start. I have already purchased a height controller as well HYPERTHERM 65. I have the old MACH3 controller, but I don't want to use it like I wrote above. I settled on this:

https://www.ebay.com/itm/SF-2100C-2-...QAAOSwZ65c0VsE

How do you think I can use this thing. I see it has two axes. Or recommend me another one to do my job, but in this price range.

Thank you for your time with my problems.