585,886 active members*
5,505 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Other Manufacturing Processes > Trumpf TC260R cannot reaches reference on C axis

Thread: Trumpf TC260R cannot reaches reference on C axis

Results 1 to 2 of 2
  1. 12-27-2019, 08:01 AM #1
    JulioFranco
    JulioFranco is offline Member
    Join Date
    Dec 2019
    Posts
    3

    Trumpf TC260R cannot reaches reference on C axis

    Dear community

    After a sheet crash the machine was sent to home. But something stuck the C axis (upper punch head). We disassembly part of the head and have it spinning again and aligned since by the stuck the position was about 30 degrees out of center.

    Now when reference axis the C axis goes to 0.039 or 360.040 but can’t get the * as the rest of the axis to get fully referenced. No error on screen only the machine trying to reach reference on C.

    Any ideas

    BYW I have tried to adjust with Zero Adjustment on indramat amplifier but no success

    Thanks in advance for your help
    Reply With Quote Reply With Quote
  2. 11-23-2021, 06:47 PM #2
    Raymx
    Raymx is offline Member
    Join Date
    Nov 2021
    Posts
    12

    Re: Trumpf TC260R cannot reaches reference on C axis

    You have to adjust the reference offset
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules