Hello, Anyone with a TM or Mini Mill running on single phase power? I need a cable part number that goes from the 320v power supply J2 to the Power Supply board P10 230v in. Haas puts a tag on each cable that determines where the cable is attached along with a part number. The part number is usually xx-xxxx with a letter at the end or not. I am attaching a diagram with a detailed view of the cable I need the part number of. Also a photo of the power supply board P10 connection with red arrow. Any help finding this part number would greatly be appreciated.
mech1atgsk
image.png (MM high volt power supply wiring diagram).png 5.png 6.jpg (85.9 KB) IMG_0927a.jpg from haas wired 208-240 volt.jpg 2.jpg (177.5 KB)