One of the Chiron mills ( 2006 - FZ15K W ) we have has lost its spindle orientation and has been making a mess of the tool pockets in the tool magazine chain. There is a locating tab in the back of the tool pocket that has been showing excessive wear. I am needing to replace about 15 or so of these pockets, but am having zero luck in finding anywhere I can buy replacement parts ($$ other than thru Chiron directly $$).
After digging thru hundreds of pages in German, which I know VERY little, I found the drawing with the correct part number I need to replace as well as how to replace the magazine chain links. I attached a file and the part in question is item #4.
Does anyone know of a supplier that would be able to help me out? Even if it is a company that breaks machines down and parts everything out.
-Cheers
Results 1 to 1 of 1
-
12-31-2019, 05:57 PM #1
Member
- Join Date
- Oct 2019
- Posts
- 1
Chiron FZ15K W Tool Magazine Chain Repair
Reply With Quote
