585,743 active members*
4,802 visitors online*
Register for free
Login
IndustryArena Forum > Community Club House > Machinist Hangout > Gerber Sabre 408 3d Cutting

Thread: Gerber Sabre 408 3d Cutting

Results 1 to 2 of 2
  1. 01-03-2020, 04:00 PM #1
    Cotterill-001
    Cotterill-001 is offline Member
    Join Date
    Jan 2020
    Posts
    1

    Gerber Sabre 408 3d Cutting

    Hi all

    Sorry to trouble the member, I am attempting to get a Gerber sabre 408 to carry out 3d profile cutting. I am hitting obstacle upon obstacle.

    I have ready some of the treads on here regarding using various pieces of software Cut3d, vcarve Pro among others with no success. I have read about using G Codes but i am struggling to understand the process of how to get this piece of equipment to actually operated.

    I am unclear how to get the data to the machine to cut....

    Any help welcome

    thanks
    Reply With Quote Reply With Quote
  2. 01-04-2020, 07:14 AM #2
    packratcnc
    packratcnc is offline Registered
    Join Date
    Feb 2006
    Posts
    11

    Re: Gerber Sabre 408 3d Cutting

    There was an Artcam spooler.

    Also an Enroute Pro version will output to a Gerber Sabre.
    Just have to set surface at top of material.

    Fusion 360 has a post processor as well.
    https://forums.autodesk.com/t5/hsm-p.../idi-p/7770442

    Send me a PM and I can email you some files if you like.

    Where are you located ?
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules