584,830 active members*
5,559 visitors online*
Register for free
Login
Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2012
    Posts
    45

    MELDAS 64S M01 OPERATION ERROR 0004

    I HAVE A CONTROL UNIT MELDAS 64

    M01 OPERATION ERROR 0004


    I HAVE CHECK:

    1. As the interlock function has activated‚ release it before resuming operation.
    2. Check the sequence on the machine side.
    3. Check for broken wires in the interlock signal line.
    Do not see any unusual problems

    I HAVE A M5PLCWIN CONECTION WITH NC UNIT MELDAS 64S BUT WHEN RS 232 COMMUNICATION

    I DO NOT UNDERSTAND PLEASE SEND INSTRUCTIONS MANUAL M5PLCWIN

    MAIL:[email protected]

    THANK YOU VERY MUCH

  2. #2
    Join Date
    Nov 2018
    Posts
    1
    Quote Originally Posted by CNC Machine OT View Post
    I HAVE A CONTROL UNIT MELDAS 64

    M01 OPERATION ERROR 0004


    I HAVE CHECK:

    1. As the interlock function has activated‚ release it before resuming operation.
    2. Check the sequence on the machine side.
    3. Check for broken wires in the interlock signal line.
    Do not see any unusual problems

    I HAVE A M5PLCWIN CONECTION WITH NC UNIT MELDAS 64S BUT WHEN RS 232 COMMUNICATION

    I DO NOT UNDERSTAND PLEASE SEND INSTRUCTIONS MANUAL M5PLCWIN

    MAIL:[email protected]

    THANK YOU VERY MUCH
    have you solved this problem? Have a machine with the same issue

  3. #3
    Join Date
    Jul 2010
    Posts
    9
    Hello friends,
    I have a problem will my moriseiki Tv-400 with MSC802(50MM). I am gettin alarm M01Operation error 0106 4th axis selection during magazine zero setting. I went to adjust mode made M3148 to 1 then made 6440.2 to 1 select c axis but same alarm appears. Can any one help me

  4. #4
    Join Date
    Dec 2020
    Posts
    8

    Re: MELDAS 64S M01 OPERATION ERROR 0004

    Hello!

    Did you find a solution?

    I have the same problem.

  5. #5
    Join Date
    Dec 2020
    Posts
    8

    Re: MELDAS 64S M01 OPERATION ERROR 0004

    Find the solution! First schould press H (handle)on the screen, than swich the axis selector to c!!!

Similar Threads

  1. Mitsubishi Meldas 50L for Daewoo - Operation Manual
    By FMJ in forum Machinery Manuals / Brochures
    Replies: 16
    Last Post: 05-16-2018, 04:32 AM
  2. Takumi MCV 1100 - Mitsubishi Meldas 500 - Not Run - Operation Status (ST1) EMG
    By raghavansa in forum Mazak, Mitsubishi, Mazatrol
    Replies: 14
    Last Post: 12-19-2015, 06:47 PM
  3. Meldas 50m - Error P460
    By droid in forum DNC Problems and Solutions
    Replies: 9
    Last Post: 11-08-2010, 11:52 PM
  4. M01 Operation Error 0101 on Mitsubishi Meldas M50 control - help!
    By SRT Mike in forum Mazak, Mitsubishi, Mazatrol
    Replies: 5
    Last Post: 03-16-2009, 02:33 PM
  5. Bus Error - meldas 500
    By L. Sakthivel in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 04-04-2008, 04:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •