Can anybody help me, We have a Mori Seki SL-15 lathe manufactured in
1987 and one of the help decided to delete all the machine parameters
and of course no one has a back up.
I was wondering if someone has a like machine that would be able to send me
a copy of the parameters
control is a yasnac n39 mx3
please help if you can the machine has been down for 2 months and we sure do need it.
If you can help please email me
Results 1 to 2 of 2
-
06-24-2007, 10:04 PM #1
Registered
- Join Date
- Jul 2004
- Posts
- 93
Mori Seki Sl-15 Machine Parameters
IF ITS NOT BROKE YOUR NOT TRYING HARD ENOUGH
Ashes to ashes , dust to dust , If it wasnt for Harleys the fast lane would rust.
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
10-25-2007, 01:36 AM #2
Registered
- Join Date
- Oct 2007
- Posts
- 6
I hope you have your machine running agian, if not and you still need parameters I can help you.
Reply With QuoteSimilar Threads
-
Mori Seki SL-O H/Fanuc how to upload pro?
By beckylee in forum FanucReplies: 4Last Post: 11-15-2009, 12:58 AM -
Daewoo Puma 2500 vs Mori Seki NL2500SY Lathes
By frogier in forum Daewoo/DoosanReplies: 34Last Post: 09-22-2008, 02:10 AM -
mori seiki nf 20dt parameters.
By PRIOR666 in forum FanucReplies: 0Last Post: 06-04-2007, 04:07 PM -
Mori-seki SL-60D MF-T6 control (fanuc 16/18?)
By Rocksalt in forum FanucReplies: 3Last Post: 03-19-2007, 04:27 PM -
Mori Seki SL4
By programmer1956 in forum Mazak, Mitsubishi, MazatrolReplies: 3Last Post: 03-08-2007, 11:22 PM
Posting Permissions
