514,812 active members
4,372 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Aug 2010
    Posts
    39

    Tool coatings - AlTiN vs. AlTiNS

    I haven't found the appropriate English translation, but my German supplier sells carbide radius cutters with both labels. The latter refers to sulfur, which they claim is even harder, and costs about 35% more. I've been using mostly the AlTiNS on bamboo plywood, which is tough on tools because of the very hard glue. I have also used the simple AlTiN sometimes in the past and was quite happy, but I am cutting a lot more wood since I last did so, so don't have a good basis for comparison. I'm wondering if the price premium is worth it? just on details, I'm mostly carving with an R3 at around 900mm/minute at 10k rpm.

  2. #2
    Member
    Join Date
    Sep 2019
    Posts
    6
    I've not heard of AlTiNS. I assume that it is Aluminium titanium nitride coating with the additional of an element beginning with S. What does the additional S standard for?

Similar Threads

  1. bit coatings
    By Ahmed1987i in forum CNC Tooling
    Replies: 1
    Last Post: 03-31-2015, 12:31 PM
  2. Coatings
    By Clyde_06 in forum General MetalWork Discussion
    Replies: 1
    Last Post: 08-18-2011, 08:22 PM
  3. Automated Coatings, Inc.
    By ACI, Inc. in forum News Announcements
    Replies: 0
    Last Post: 02-13-2010, 12:52 PM
  4. Coatings
    By chunkymonkey in forum General MetalWork Discussion
    Replies: 1
    Last Post: 07-17-2009, 06:03 PM
  5. Tool Coatings
    By jl123 in forum General MetalWork Discussion
    Replies: 8
    Last Post: 12-05-2006, 07:46 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •