512,341 active members
2,739 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > SprutCAM > Sprutcam path calculation error
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    May 2019
    Posts
    2

    Exclamation Sprutcam path calculation error

    Hello, I am new to the forum. I get this error when I calculate sprutcam 11 trajectory, only with the gypsy table on the fixed table it does not happen to me and it does not give me an error.
    Any ideas, thanks.
    Attached Thumbnails Attached Thumbnails Screenshot_1.jpg   Screenshot_3.jpg  

  2. #2
    Member
    Join Date
    May 2019
    Posts
    2
    I'm already resolved, thanks.
    It was trajectory failure was not correct

Similar Threads

  1. Error calculation with gypsy table
    By juanjoperez in forum SprutCAM
    Replies: 0
    Last Post: 01-01-2020, 01:51 PM
  2. V30 outputting arc calculation error
    By jay_dizzle in forum BobCad-Cam
    Replies: 6
    Last Post: 05-22-2019, 03:35 PM
  3. Sprutcam 7 Postprocessor for Path pilot
    By popspipes in forum SprutCAM
    Replies: 0
    Last Post: 05-04-2015, 09:13 PM
  4. Aspire tool path calculation 40 + mins!
    By BOATDUDEGUY in forum Aspire
    Replies: 3
    Last Post: 08-25-2013, 12:23 AM
  5. Calculation of covered path HSC
    By Kaufer in forum HSC (HighSpeedCutting)
    Replies: 1
    Last Post: 05-31-2010, 05:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •