The machine is clearly a desktop cnc. Most of the parts are self-designed including the spindle, motor (servo motor and direct drive motor), ATC, controllers, software and even the chips inside.
It can cut 10*10*10cm workpiece and handle softmetal and plastics very well.
Spindle: 12000rpm
Travel:X160mm/Y210mm/Z130mm
Would love to have some input from you guys.
Results 1 to 2 of 2
-
03-21-2024, 10:04 AM #1
Member
- Join Date
- Mar 2024
- Posts
- 3
Build a Desktop 5-axis CNC Machine and It Worked!!!
Last edited by Unionx; 03-21-2024 at 10:37 AM.
-
03-22-2024, 01:27 PM #2
Member
- Join Date
- Oct 2004
- Posts
- 314
Re: Build a Desktop 5-axis CNC Machine and It Worked!!!
Nice looking? What control software are you using?
-
04-13-2024, 10:44 PM #3
Registered
- Join Date
- Jan 2010
- Posts
- 294
Re: Build a Desktop 5-axis CNC Machine and It Worked!!!
Pics or it didn't happen
www.steelplinkers.com
-
04-14-2024, 01:21 AM #4
Community Moderator
- Join Date
- Apr 2018
- Posts
- 133
Re: Build a Desktop 5-axis CNC Machine and It Worked!!!
I'm closing this thread.
There are times when claims made on the net are somewhat exaggerated, and perhaps those might be tolerated here. But clearly false info posted by a commercial entity posing as "look what I built" is not going to be acceptable here.
Reply With Quote
Posting Permissions
