518,265 active members
3,732 visitors online
Register for free
Login
IndustryArena Forum > Community Club House > General Off Topic Discussions > Need help with Xylotex and autozero
Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jun 2017
    Posts
    3

    Need help with Xylotex and autozero

    I need some insight on my Z-Axis auto-zero plate install in Mach3. I have a 4-Axis Xylotex board (XS-3525/8S-4), and am only using XYZ, no A axis.
    When I press the autozero-button on the Mach3 screen, the “screen z display goes to 0”, then the spindleZ moves a micro bit, then retracts up to +1 (which is in the script). The spindle never goes negative and makes contact with the touch-off plate.



    In advance, Thanks to anyone that reads this.
    Chris
    Last edited by csryffe; 02-06-2020 at 02:33 PM. Reason: No longer relevant

  2. #2
    Member
    Join Date
    Jun 2017
    Posts
    3
    Sorry, tried to delete post. I figured it out.
    Last edited by csryffe; 02-06-2020 at 02:32 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •