Good day and best for the year ahead.
Guys, i got a problem i hope some one out there can help with.
Mori Seiki VA-40 MILL with a FANUC 6 control and assisted by a MICON 8 driven ATC.,
Machine lost its MICON parameters due to battery failure.
Problem is i do not have a back up list for this machine . Found the timers for it but need the parameters for the EPROM settings under the 30/31 mode.
Does any body out there have a list of these parameters or hopefully a similar machine to get a copy of them?
Your help would be appreciated.
Thx Guys