548,277 active members*
594 visitors online*
Register for free
Results 1 to 1 of 1
  1. #1
    Join Date
    Jan 2020

    Transfer program from pc to mazak fusion 640mt

    Hi all,
    I’m trying to get the communication working on our integrex 200sy. I can send an eia program from the machine to the pc, but then I try to send it right back and I haven’t been able to get it to work. I’m getting codes 550 & 551 something like“ couldn’t locate program on tape”. I’m using data I/o, tape, and only trying to transfer eia programs. When I send from the machine to the pc it output a % sign at the beginning of the program. I tried deleting that as well as leaving it, to no avail. Also the machine outputs several G424 codes at the beginning of the program,?.

    Obviously I don’t know much about this, and am looking for some expertise on the subject.
    Ay hel is appreciated.

  2. #2
    Join Date
    Aug 2009

    Re: Transfer program from pc to mazak fusion 640mt

    Welcome to the zone....

    this Link might help you.... https://www.cnczone.com/forums/mazak...mastercam.html

    Is this your Control Manual ?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts