Re: ADTECH CNC4640 can't read from usb
Originally Posted by
compfranon
A friend has asked for help with his cnc router, he is unable to load programs from the usb drive.
The machine was shutdown over the holiday period, and on return it no longer reads from the usb drive, the response from the system is "can't open catalog"
We have tried:
Reboots
Using different usb drives, formatted fat32 and ntfs etc.
Replaced the usb connector
using the SD card slot
On bootup:
system ver: 0.7.09
Hardware ver: 2.0
I have no experience with this controller so looking for any guidance available, i'm currently trying to find the correct manual and will also look at hooking up to a laptop to transfer programs via network port, all help appreciated.
After all you have done above, seems the problem comes from the CNC4640 itself.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html