Re: Engraving wood using fiber laser
Originally Posted by
tumim
Hello,
Initial data: Raycus 50wt, 200 * 200
Material: Plywood, oak.
Task: Get an engraving.
After reading the manuals, it became clear that a fiber engraver can not engrave on wood, however, some of my colleagues in the workshop do this engraving, claiming that they have fiber engravers.
As far as I know, wood engraving can only be obtained on CO2 or galvanic CO2 machines.
If nevertheless I am not right, please tell me the approximate parameters for such an engraving for testing.
Thanks in advance for your reply.
If you need I have 100W Synrad Galvo marking machine. Close to 120W real power.
CNC lasers, constructions, service