584,858 active members*
4,783 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hardinge Lathes > Hardinge CHNC 1 emergecy stop 6000
Results 1 to 16 of 16
  1. #1
    Join Date
    Aug 2012
    Posts
    126

    Hardinge CHNC 1 emergecy stop 6000

    Hi All,

    Subject to my previous post on my Hardinge CNHC1 Siemens 810T control, So now I have managed to get the machine to power up (the fault was a short in the turret encoder) It took
    me an age to find! I have removed the faulty unit, looks like its sealed in some sort of resin?

    I now have a 6000 Emergency Stop, my question is will the machine give me this E-stop even though I have removed the faulty unit (I thought I might still be able to move the axis and maybe
    start the spindle? as I do not get any alarms related to the turret?

    Thanks for any help.

    Allen

  2. #2
    Join Date
    Mar 2010
    Posts
    1852

    Re: Haedinge CHNC 1 emergecy stop 6000

    Make sure BOTH of the emergency stops are off, then clear the alarms. You can do nothing until that alarm is cleared. I had a bad E-stop switch on mine once.
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  3. #3
    Join Date
    Aug 2012
    Posts
    126

    Re: Haedinge CHNC 1 emergecy stop 6000

    Hi,

    Thanks for your reply greatly appreciated, Yes I have done that, I have also checked both e-stops with a digital meter and both are good, The machine is not on the hard stops (I always move the axis
    well clear of the limit switches before I shut the machine down,

    Is it possible with the turret encoder removed that this would cause the e-stop? (6000)

    Thanks Allen.

  4. #4
    Join Date
    Mar 2010
    Posts
    1852

    Re: Haedinge CHNC 1 emergecy stop 6000

    Nope, looks like just the e-stop switch.

    See attached
    Attached Files Attached Files
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  5. #5
    Join Date
    Nov 2011
    Posts
    39

    Re: Haedinge CHNC 1 emergecy stop 6000

    I have a spare E stop switch if needed ! [email protected]

    Ed

  6. #6
    Join Date
    Mar 2010
    Posts
    1852

    Re: Haedinge CHNC 1 emergecy stop 6000

    That's good, hope you find the problem. Hard to help you from long distance!
    Two Haas VF-2's, Haas HA5C, Haas HRT-9, Hardinge CHNC 1, Bother HS-300 Wire EDM, BobCAD V23, BobCAD V28

  7. #7
    Join Date
    Aug 2012
    Posts
    126

    Re: Haedinge CHNC 1 emergecy stop 6000

    Hi,

    Thanks for the attachment, a great help! So you don't think that with the turret encoder completely removed it will give me an E-stop? that was my thoughts? do you think it could be a faulty limit switch?

    I have been trying all day to clear the alarm but no luck

    Thanks again for your help

    Allen.

  8. #8
    Join Date
    Aug 2012
    Posts
    126

    Re: Haedinge CHNC 1 emergecy stop 6000

    Hi Ed,

    what about a Turret encoder?

    Thanks,

    Allen

  9. #9
    Join Date
    Nov 2011
    Posts
    39

    Re: Haedinge CHNC 1 emergecy stop 6000

    Allen,
    What # is on yours ? C2-137B Can't read the number on the other one
    ed

  10. #10
    Join Date
    Aug 2012
    Posts
    126

    re: Hardinge CHNC 1 emergecy stop 6000

    Hi Ed,

    Yes! that's exactly the same number, C2-137B Have you got one?

    Allen.

  11. #11
    Join Date
    Nov 2011
    Posts
    39

    re: Hardinge CHNC 1 emergecy stop 6000

    Allen,
    Yes i do !!!!! Make me a fair offer . Is there anything else you need ? Give me an address to send ! Can you pay by paypal ? If so i can send you an invoice .
    Ed

  12. #12
    Join Date
    Aug 2012
    Posts
    126

    re: Hardinge CHNC 1 emergecy stop 6000

    Hi Ed,

    Yes I can pay via PayPal, I don't no where to start with an offer, got no idea what they cost new (not that you can get them now) I am in the Uk so obviously there will be postage costs
    Can you give me a price or somewhere to start?

    Allen

  13. #13
    Join Date
    Nov 2011
    Posts
    39

    re: Hardinge CHNC 1 emergecy stop 6000

    Allen,
    company owner said $150 with shipping and i well give you a e stop ! How does that sound ?

    Ed

  14. #14
    Join Date
    Aug 2012
    Posts
    126

    re: Hardinge CHNC 1 emergecy stop 6000

    Hi Ed,

    Yes that sounds ok to me, can you just confirm that the part is in good working order, and also I will need your e-mail address to send money via PayPal,

    Thank you,

    Allen

  15. #15
    Join Date
    Nov 2011
    Posts
    39

    re: Hardinge CHNC 1 emergecy stop 6000

    Allen,
    I myself removed it ! It was working fine when removed a month ago . [email protected] is mine . [email protected] send for payment and address to send parts
    thanks
    Ed

  16. #16
    Join Date
    Aug 2012
    Posts
    126

    re: Hardinge CHNC 1 emergecy stop 6000

    Hi Ed,

    So you have given me two E-mails what one should I send money to? bit confused with your reply,

    Allen.

Similar Threads

  1. Hardinge CHNC 1 Lathe will not power up
    By moonman5 in forum Hardinge Lathes
    Replies: 0
    Last Post: 01-11-2020, 07:53 PM
  2. Replies: 4
    Last Post: 03-10-2018, 07:37 PM
  3. Replies: 1
    Last Post: 01-09-2018, 10:40 PM
  4. HELP ME! Mazak alarm 207 EXT EMERGECY STOP
    By huutanthaco in forum Maintenance DIY Discussion
    Replies: 1
    Last Post: 02-26-2013, 04:18 PM
  5. Replies: 5
    Last Post: 12-31-2011, 02:29 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •