584,817 active members*
5,215 visitors online*
Register for free
Login
Results 1 to 16 of 16
  1. #1

    ISEL Software

    Hello all,

    I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

    Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

    Thank you,
    All the best,
    Valentin

  2. #2
    Join Date
    Oct 2016
    Posts
    30

    Re: ISEL Software

    Maybe it's good that you contact the following web site:
    https://www.isel.com/de/produkte/sof...ml?___store=de

  3. #3

    Re: ISEL Software

    Of course I've been there and wrote them and also spoke by phone: replies were constant "we don't offer software for that controller, because it is too old. Throw it away and buy new." I don't know what this means in money, but I would not be surprised that only the controller is more expensive than what I can get for my whole 350 kg machine.

    Those conversations with them I had about 6 years ago.

  4. #4
    Join Date
    Mar 2016
    Posts
    322

    Re: ISEL Software

    Did U try galaad software?
    In my opinion it is much more user friendly than isels.

  5. #5

    Re: ISEL Software

    According to this, Galaad also does not support UPMV 4/12.

    https://www.cnczone.com/forums/gener...-software.html

    Thanks for the idea, though!

  6. #6
    Join Date
    Oct 2016
    Posts
    30

    Re: ISEL Software

    Quote Originally Posted by valentin777 View Post
    Hello all,

    I have an old ISEL GFV machine, with servo UPMV 4/12 controller and UVE 8012 power stages, with old software for MS-DOS, Remote over ISELDRV.EXE.

    Does anyone have the Windows version of Remote for UPMV 4/12? ISEL does not provide it anymore, I asked them, and tried current version of Remote: does not have UPMV 4/12 anymore.

    Thank you,
    All the best,
    Valentin

    Here you may find what you are looking for:
    https://www.isel.com/en/support-down...germanyag.html

  7. #7

    Re: ISEL Software

    Hi,

    Current versions of Remote DO NOT contain drivers for UPMV 4/12. I have a Remote setup kit downloaded from their site, it misses MCTL_UPMV4.DLL (motion control) and a few more (spindle control, IO, etc) . I also wrote/spoke with them: same result.

    This guy from Croatia was also not finding them in 2015, same answer from ISEL: "we don't support such old controller".

    https://www.cnczone.com/forums/techn...-software.html

    Thank you,
    Valentin

  8. #8
    Join Date
    Dec 2016
    Posts
    10

    Re: ISEL Software

    BUMP.
    I have the same issue.Any help would be greatly appreciated.

  9. #9
    Join Date
    Aug 2020
    Posts
    3

    Re: ISEL Software

    I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.

  10. #10
    Join Date
    Dec 2016
    Posts
    10
    Quote Originally Posted by bp_me View Post
    I have a really old version of remote that does what you are asking for. It seems to be stuck in german though.
    Is that a DOS or windows version? If it’s Windows It would be very helpful

  11. #11
    Join Date
    Aug 2020
    Posts
    3

    Re: ISEL Software

    Quote Originally Posted by rc-worcs View Post
    Is that a DOS or windows version? If it’s Windows It would be very helpful
    Windows. It even seems happy to run on Win10. Though I'm currently waiting on cables to come to verify that.

  12. #12

    Re: ISEL Software

    Hello Brendan,

    I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

    Best regards,
    Valentin.

  13. #13
    Join Date
    Aug 2020
    Posts
    3
    Quote Originally Posted by valentin777 View Post
    Hello Brendan,

    I'm very interested in your Windows version of Remote, that can drive UPMV 4/12. Please: does it contain MCTL_UPMV4.DLL? Or some mctl____.vxd?

    Best regards,
    Valentin.
    I'm unsure what's in the cab files. It gives the option for the upmv 4/12 during the installation. I'm using an icm4 machine myself.

  14. #14

    Re: ISEL Software

    Hi Brendan,

    Could you please PrivateMessage me? or email valentin777 at gmx.net?

    Best regards,
    Valentin

  15. #15

    Re: ISEL Software

    Hi Brendan, valentin777,

    Can I also have that software please? Stuck in exactly same problem

    Thank you very much

  16. #16
    Join Date
    Apr 2022
    Posts
    5

    Re: ISEL Software

    Quote Originally Posted by crisiacuf View Post
    Hi Brendan, valentin777,

    Can I also have that software please? Stuck in exactly same problem we become what we behold

    Thank you very much
    Me too

Similar Threads

  1. Galaand/Kay software for Isel/Unimatic
    By Eatonbrayer in forum Uncategorised CAM Discussion
    Replies: 10
    Last Post: 11-18-2016, 11:34 AM
  2. Isel EP1090 Software
    By MisCar in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 11-27-2015, 03:40 PM
  3. Techno Isel Software
    By johnono in forum Commercial CNC Wood Routers
    Replies: 21
    Last Post: 08-02-2010, 02:31 AM
  4. Techno-ISEL MAC 100 software?
    By wmb in forum MetalWork Discussion
    Replies: 0
    Last Post: 08-09-2006, 09:39 AM
  5. HELP!! Software for Isel EP-1090
    By Riffraff2 in forum Benchtop Machines
    Replies: 2
    Last Post: 11-18-2005, 06:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •