Our church had a men's Beast Feast tonight where they served rabbit, deer, duck, alligator, white perch, elk, and pig. I didn't go but from the looks of the cars my guess is there were 60-70 men in attendance. So I figured some Walnut trivets would be good door prizes and I made three plus a US flag.
The trivets are finished with mineral oil and the flag is sprayed with Nitrocellulose lacquer. I used gloss but probably should have used semi-gloss. The flag is about 5" x 10" and the trivets range from about 6" to 7" x 10" to 12".
Enjoy!
David
Thread: Walnut door prizes
Results 1 to 3 of 3
-
01-23-2020, 05:05 AM #1
Community Moderator
- Join Date
- Nov 2014
- Posts
- 724
Walnut door prizes
David
Romans 3:23
Etsy shop opened 12/1/17 - CurlyWoodShop
-
01-23-2020, 06:19 PM #2
Member
- Join Date
- Sep 2005
- Posts
- 1740
Re: Walnut door prizes
And it took you how long David with your FLA machine? Very nice.
Retired Master Electrician, HVAC/R Commercial. FLA Saturn 2 4x4 CNC Router Mach4 Kimber 1911 45ACP
-
01-23-2020, 06:24 PM #3
Community Moderator
- Join Date
- Nov 2014
- Posts
- 724
Re: Walnut door prizes
Thanks, Bill! Each took 10 minutes or less to cut on the CNC. Fusion 360's Adaptive Clearing can seriously hog some material!
Of course, the table saw, jointer, planer, drum sander, stationary belt sander, spindle sander, ROS, hand sanding, and finishing added a bit more than 10 minutes each.
DavidDavid
Romans 3:23
Etsy shop opened 12/1/17 - CurlyWoodShop
Reply With Quote
