Machine has fanuc oi-tf control with c axis and live tooling.
I can get it to tap with horz & vert live tooling but not with main spindle.
Tried every thing I can think of. This works for horz on center & off.
T?
M15(LIVE TOOLING OFF TO SET SPINDLE)
GOX?Z?
M29S?
G84Z-?F?
G80
I should be able to replace M15 with M5 to set main spindle.
This has worked for other lathes with live.
Lathe is a Smart Machine NL3000BLM
Thanks
Tim