585,605 active members*
3,263 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > UG NX > NX Post Builder help please

Thread: NX Post Builder help please

Results 1 to 2 of 2
  1. 01-25-2020, 11:56 AM #1
    ralphdsm
    ralphdsm is offline Registered
    Join Date
    Nov 2009
    Posts
    1

    NX Post Builder help please

    I made a post for a DMG Mori and TC8 works perfect for everything but I cannot for the life of me get Traori to function properly when doing variable contouring. You would think using Siemens software for a machine with Siemens control would be a bit easier. Any help is appreciated.
    Reply With Quote Reply With Quote
  2. 01-27-2020, 02:56 PM #2
    1 Infinite Loop
    1 Infinite Loop is offline Registered
    Join Date
    Sep 2009
    Posts
    78

    Re: NX Post Builder help please

    I don't have experience triggering Traori but have you looked at the default posts for reference? I have NX 12 and 1899 installed and noticed there are no Sinumerik posts in 12 but there are some in my 1899 install. If you have access there are also a number of them in the GTAC downloads area.
    NX 10.0.3
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. How to Create Customized Mill 3axis Fanuc post with NX POST BUILDER & TCL
    By mrpyon in forum Postprocessor for CAM
    Replies: 0
    Last Post: 12-19-2019, 12:12 PM
  2. Controllers for NX POST Builder
    By ngmajid in forum UG NX
    Replies: 2
    Last Post: 08-14-2014, 05:05 AM
  3. Controllers for NX POST Builder
    By ngmajid in forum UG NX
    Replies: 3
    Last Post: 08-14-2014, 04:37 AM
  4. NX7.5 Post Builder
    By srl in forum UG NX
    Replies: 2
    Last Post: 01-29-2013, 07:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules