584,812 active members*
5,321 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Turning > mori seiki sl-3h yasnac lx1 off line job
Results 1 to 3 of 3
  1. #1
    Join Date
    Jun 2011
    Posts
    3

    mori seiki sl-3h yasnac lx1 off line job

    Click image for larger version. 

Name:	HOBD2036.jpg 
Views:	2 
Size:	86.7 KB 
ID:	435385

    can anyone help me here please, i have this mori seiki sl3-h
    when i hooked up to the power, the screen shows off line job. no error no messege no nothing just that


    they hydralic power up the machine power up but not the controler.

    never seen this before.


    thank you in advance

  2. #2
    Join Date
    Jun 2011
    Posts
    3
    in case anyone has this problem.
    it was the tape reader, the tape ready switch should be set to system. not load, in my case it was on load.

  3. #3
    Quote Originally Posted by johnakame2 View Post
    in case anyone has this problem.
    it was the tape reader, the tape ready switch should be set to system. not load, in my case it was on load.
    How's that sl3 running for you? I'm trying to figure one out.
    I heard they're great but hard to learn.
    Also noticed when I turn it on, it doesn't repeat where it was, then read it runs off g50. I'll be happy to call you, send you gifts, if you can help me get this beast going.
    It's also been fitted with a usb reader through the r232 port and it's not picking it up either. Not sure if I have the parameters correct. I have them set at 9600 baud rate, with 8bit and 2 but stop.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •