585,875 active members*
4,132 visitors online*
Register for free
Login

Thread: Need help

Results 1 to 2 of 2
  1. 01-27-2020, 11:53 AM #1
    ummy00
    ummy00 is offline Member
    Join Date
    Jan 2020
    Posts
    1

    Question Need help

    https://imgur.com/a/ptXQ5BV
    Hi,
    Is there an option to engrave inner lines and cut outer lines with Rdworks or some other software?
    Reply With Quote Reply With Quote
  2. 01-27-2020, 08:16 PM #2
    he1957
    he1957 is offline
    Join Date
    Jun 2018
    Posts
    362

    Re: Need help

    Not familiar with RDwords but with typical software and approaches you'd define two tool paths.

    The first as an engraving profile/contour with an engraving bit covering the outlines you want to engrave and the second for a cut profile using a cutting bit for the (outer) edge of the profile and cut them at the required depths.

    Other than RDwords, have a look at SimplyCam from MR-Soft Nc Software Tools for a different 2.5D drawing and G-Code generator program that can do this.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules