Hello group , i am trying to add M11Px/M10Px to a Fusion Post Processor to setup my laser trigger quick , I tried many ways to edit with HSM : Visual Studio and failing ...
I found PPs for other softwares like DotG , Aspire etc and they work fine to add the M10/M11 and it works with Mach3 but i didnt found PPs using the M11/M10 to prepare g-code with Fusion360...
I can see the other CAM softwares are using a .PP format of the PostProcessors but Autodesk is only using .CPS and it is waaaayyyy more complicated to add M11/M10 to every places when it is doing Rapids in between traces.
Am i missing a point? is there a way to add a script in between each moves G1-G0 directly into Fusion360 CAM instead of editing a post processor ? I am wondering why i didnt found any PP using M11/M10 , am i just too dumb ?
I would appreciate some help !
The .PP format is sooooo simple to edit !!
but trying to edit the .CPS post processor is just giving errors , even using the Autodesk HSM system i found to edit them and i followed tutorials ive seen...