584,846 active members*
4,636 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Alphacam > Alphacam and Pade uni 5
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2020
    Posts
    1

    Unhappy Alphacam and Pade uni 5

    Hello guys!

    I got some questions about Pade, cause i don´t know what to do!
    I´m working with Alphacam and sometimes, when i generate easy operations like circles, the machine is doing something else, than i was generating in Alphacam. Is this a Post processor error, or what happens in the machine?
    Yesterday the machine is showing some errors and the only way to get them out was a restart.
    When i´m working with 3 Axis every measuring is fine but when i start to mill a workpiece from side with the head of the tool, the measuring is every time -1mm than i wanted.
    Is there a possibility to change some parameters to adjust the axis?
    when i plane a surface the high of Z is exact too.



    Best Regards
    moertn

  2. #2
    Join Date
    Apr 2015
    Posts
    327

    Re: Alphacam and Pade uni 5

    Can you please upload there a problematic NC code and Alphacam project?
    Alphacam post and VBA macros, Autodesk HSM post.
    www.cadcam-softcz.cz

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •