[hootsmangreen]

Hi, my cnc has went down and I need a wee job done. Some engraving on 5mm acrylic. I can supply the acrylic. It's 4 panels about 210mm by 200mm. email me on [email protected] if you are interested.
I am in the UK. I can supply the file in any format. *.ai *.eps *.dxf *.pdf or if you want the *.tap file then no prob it's only a 90 v carve bit and a 3mm end mill.

Matt

[he1957]

Hey Matt,

Your location, time-frame and whether you already have the DXF and/or cut files would make it easier for folks to respond.

I could do it but I'm sure Tasmania is not where your were hoping to get a response from :-)

[hootsmangreen]

Hey Matt,

Your location, time-frame and whether you already have the DXF and/or cut files would make it easier for folks to respond.

I could do it but I'm sure Tasmania is not where your were hoping to get a response from :-)

I'm in the UK can supply the file in any format you want.