521,889 active members*
1,897 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Surfcam > Long hand can cycle drill?
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Feb 2006
    Posts
    952

    Long hand can cycle drill?

    Anyone know how to get Surfcam spit out long hand can cycle? Right now, it going like this G98 G81 Xxx Yxx R.1 and because I have home made machine will not understand can cycle and it only will take do simple G0 G1 G2 G3

    Example:

    G0 Xxx Yxx
    G1 Zxx
    G00

    Etc....


    Help me !

    I know Mastercam can do that....... I want to understand it with Surfcam. Thanks
    The best way to learn is trial error.

  2. #2

    Re: Long hand can cycle drill?

    Hi CNCRim:
    Here is the answer for you, from the Surfcam Help Book

    Emulated Can Cycles:
    When built-in machine canned cycles are not available, the cycles can include any desired code that is to be repeated at each location. Since these cycles are not built-in canned cycles, the machine tool does not require a Cancel code. Define a straight drilling cycle by describing the Drill sequence as follows:

    Drill

    G0 X[h] Y[v] Z[rplane] # Rapid to position Rplane.

    Z[vclear] # Rapid down to clearance.

    G1 Z[d] F[plunge] # Feed down to bottom.

    G0 Z[rplane] # Rapid out to Rplane level.

    End


    The output code:

    G0 X1. Y1. Z.2

    Z.1

    G1 Z-.5 F5.

    G0 Z.2

    G0 X2. Y3. Z.2

    Z.1

    G1 Z-.5 F5.

    G0 Z.2

    G0 X3. Y4. Z.2

    Z.1

    G1 Z-.5 F5.

    G0 Z.2

    -.-.-.-.-.-.-.-.-.-.-.-.

    Good luck.
    Mario.

  3. #3
    Registered
    Join Date
    Nov 2009
    Posts
    3

    Re: Long hand can cycle drill?

    From the 2 axis hole process, under the "Cut Control" tab..., in the "Cycle Type" box..., choose "Chip Break" and when you post, it will come out "long hand"

Similar Threads

  1. Tapping. G84 or Long-hand?
    By RussMachine in forum Tormach PathPilot™
    Replies: 2
    Last Post: 04-26-2017, 04:59 AM
  2. Long hand post for an integrex
    By lenny09 in forum GibbsCAM
    Replies: 0
    Last Post: 11-20-2014, 03:07 PM
  3. Haas TL1 IPS or Long hand or DFX?
    By cpmfastools in forum Haas Lathes
    Replies: 0
    Last Post: 04-24-2013, 12:34 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •