I am engraving 2' x 2' plaques where the metal is close, but not exactly flat. And any change in depth results in less than stellar final products, because the text i am working with it pretty thin. I have a dual drum sander that get things closer to flat, but only closer. I am currently using a spring loaded tool, which does make things a little better, but my depths across multiple pieces are inconsistent. Sometimes it is a heavier cut, and when the pieces are lined up the depth changes become very apparent.
I have a Laguna IQ Pro.
Is there any machine, or add-on that can track the changes in z height so that my letters are consistent?
Any other ideas?
Results 1 to 2 of 2
-
02-13-2020, 06:29 PM #1
Registered
- Join Date
- Nov 2016
- Posts
- 1
tracking changes in z height of material.
-
02-14-2020, 04:29 AM #2
Member
- Join Date
- Nov 2012
- Posts
- 1267
Re: tracking changes in z height of material.
Check out Autoleveller, that's what I have been using for that purpose.
Similar Threads
-
Help wiring Tool Height/ Z axis height base into C10 BOB
By SpecialEd in forum Tormach Personal CNC MillReplies: 2Last Post: 11-21-2016, 02:13 AM -
HPR130. THC will not auto adjust to material height.
By frostystones in forum Hypertherm PlasmaReplies: 5Last Post: 07-30-2016, 06:35 AM -
Z tracking possible?
By Epiphany in forum Dynomotion/Kflop/KanalogReplies: 4Last Post: 08-06-2014, 11:08 PM -
Problem with cutting tool height to material
By paulkr in forum SheetCamReplies: 1Last Post: 10-28-2008, 07:56 AM
Tags for this Thread
Posting Permissions
