584,860 active members*
5,065 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > HURCO > Hurco VMX24 ULMax 4 error servo drive AL10
Results 1 to 3 of 3
  1. #1

    Hurco VMX24 ULMax 4 error servo drive AL10

    hi
    i have problem with Hurco ,sometimes works 1 day ,sometimes works 5 days,sometime works couple hours ,
    today i turn on machine works couple hours and receive on the display servo Y faulty on the monitor,in cabinet on the servo Y is AL10,sometimes i get faulty X axis and alarm AL10 on servo ,one time i receive faulty Z axis and AL10


    please helpClick image for larger version. 

Name:	HURCO (1).jpg 
Views:	3 
Size:	90.2 KB 
ID:	436588Click image for larger version. 

Name:	HURCO (2).jpg 
Views:	1 
Size:	105.1 KB 
ID:	436596

  2. #2
    Join Date
    Apr 2019
    Posts
    58

    Re: Hurco VMX24 ULMax 4 error servo drive AL10

    Check what al10 means in servo catalog

    [email protected]
    +37060022992

  3. #3
    Join Date
    Feb 2020
    Posts
    3

    Re: Hurco VMX24 ULMax 4 error servo drive AL10

    I think it's an over temp alarm. Usually this means that the fan inside the servo has failed and the heat sink is overheating. If you are getting this on multiple axes then try opening up the cabinet a crank and see if better airflow through the electrical cabinet makes it go away. The actual alarm may be listed as an over current alarm, and if its not the fan, then it can be tested by swapping all of the wiring from the x to the y axis and running the machine. If the error swaps to the y axis then its either the motor or cables from the servo amp to the motor. If it stays on the x axis then you need a new servo or need to rebuild the one you have.

Similar Threads

  1. Need Help VMX24 servo fault at both axis
    By els_engineering in forum HURCO
    Replies: 6
    Last Post: 01-22-2021, 02:59 PM
  2. Replies: 1
    Last Post: 02-15-2020, 05:17 AM
  3. Hurco VMX24 control kit Won't booting
    By KangMus in forum Milling
    Replies: 0
    Last Post: 02-14-2020, 07:55 AM
  4. NEED HELP! Fault Code x-axis (HURCO VMX24)
    By wolfyy98 in forum HURCO
    Replies: 3
    Last Post: 01-03-2013, 01:56 PM
  5. Hurco VMX24 ATC Overload Fault
    By Doug E. Hurco in forum HURCO
    Replies: 13
    Last Post: 12-27-2011, 08:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •