It's an ESAB. Old one. Plasma. I have an example of a .cnc file that works in raw gcode output: https://pastebin.com/arr9WJt0 The person we normally have cut out parts is in jail, so I need to figure out how to do this on my own. He used solid works and pronest 8 to generate the file. I managed to get a hypertherm post processor setup in fusion 360 and have created the part design in rhinoceros 5 output as .dxf. It created this: https://pastebin.com/B1WqetWh I was told by a professional in Canada that I need to locate the specific post processor for the machine. Again, totally green, don't know quite what I'm doing, but I think I might be able to wing it. Is there not a way to customize the output I generated from fusion 360 and tailor it to the settings (gcode) within the file that works? I.e., https://pastebin.com/arr9WJt0