[larryre59]

We had a board go out on our Miyano BND 34s with a Fanuc 21-T control. With the Help of Fanuc and Local Miyano service, We have the machine up and running, but it doesn't generate a Radius. We bought the machine used and found out that we didn't have the parameters for the machine. fanuc entered parameters they thought would work. Miyano hasn't been able to help.
We have a program that uses a G03 X.75 Z-.05 R.05. And the machine does a big radius away from the part on the Z axis and then way above on the X axis and stops at the end point but doesn't come close to the part.

Program Example:
G00 X.85 Z0.1
G00 X.65
G01 Z0 F.005
G03 X.75 Z-.05 R.05
G01 Z-1.0
X.8
G00 X7.0 Z7.0
M01

[Chrisptm]

We had a board go out on our Miyano BND 34s with a Fanuc 21-T control. With the Help of Fanuc and Local Miyano service, We have the machine up and running, but it doesn't generate a Radius. We bought the machine used and found out that we didn't have the parameters for the machine. fanuc entered parameters they thought would work. Miyano hasn't been able to help.
We have a program that uses a G03 X.75 Z-.05 R.05. And the machine does a big radius away from the part on the Z axis and then way above on the X axis and stops at the end point but doesn't come close to the part.

Program Example:
G00 X.85 Z0.1
G00 X.65
G01 Z0 F.005
G03 X.75 Z-.05 R.05
G01 Z-1.0
X.8
G00 X7.0 Z7.0
M01

What does the machine do with the following
G0 X.85 Z0.1
X.65
G1 Z0 F.005
X.75 R.05
Z-1.0
G0 X7.0 Z7.0
M01