584,805 active members*
5,200 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > Laser Control Software > LaserCut > Lasercut 5.3 not displaying correctly, settings cut off
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2017
    Posts
    2

    Lasercut 5.3 not displaying correctly, settings cut off

    Hello,

    I purchased a second hand Rabbit 1290 and am trying to get it running. It is running a Leetro 6535 with Lasercut 5.3 downloaded directly from Leetro's site. The software installed fine and talks to the laser but does not display correctly. The buttons and icons are all oversized and the settings menu has the side and bottom cut off. There is no scroll bar and when I manually move the window it remains cut off with no way to change the size of the window. I contacted Rabbit (who have been helping with other stuff and have been great!) and their suggestion was to get a monitor that runs 1200x1600 resolution. All of the videos I have seen lead me to believe that I don't need to do that and there is something wrong with my install. Thanks for the help.

  2. #2
    Join Date
    Aug 2020
    Posts
    2

    Re: Lasercut 5.3 not displaying correctly, settings cut off

    On-Site Repair
    CellFixx.ca is ​​now repairing your mobile device at your current address!
    Make an appointment, our technician will come and repair your device at your location. Never get in your comfort.

  3. #3
    Join Date
    Nov 2020
    Posts
    1

    Re: Lasercut 5.3 not displaying correctly, settings cut off

    i see very few people are repairing iphone 6s do you guys repair iphone 6s??

Similar Threads

  1. Probing does not work correctly when displaying machine co-ordinates
    By ex-egll in forum Mach Software (ArtSoft software)
    Replies: 5
    Last Post: 07-08-2013, 11:27 PM
  2. 4 axis screen set not displaying correctly
    By robe_uk in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 08-22-2012, 11:23 PM
  3. LaserCut 5.3 settings for glass
    By NFATeacher in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 12-02-2011, 05:14 AM
  4. Grid not displaying correctly in d-cad
    By windy_miller in forum Dolphin CAD/CAM
    Replies: 4
    Last Post: 11-28-2008, 02:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •