584,812 active members*
5,393 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > Opinions on the Logic trace board
Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2012
    Posts
    1

    Opinions on the Logic trace board

    I have a 4x4 plasma table mainly just cutting signs and small parts. I want to expand and was considering a Logic trace board. I do not have a CAD background and usually have my brother draw things up when I need them, but that is hard to get done sometimes.
    I would like to know if it is worth the money and is there work out there to justify my purchase?. Since I don't have one I don't know what opportunities are out there with this setup.Any advise will help. Thanks. Bob

  2. #2
    Join Date
    Aug 2009
    Posts
    1566

    Re: Opinions on the Logic trace board

    Hi Bob,

    Try this https://www.freecadweb.org/

    Welcome to the zone,
    DJ

  3. #3
    Join Date
    Aug 2013
    Posts
    3

    Re: Opinions on the Logic trace board

    If you are making complex shapes, it may be worth it. If it is something that you can easily draw up using geometric shapes, you probably don't need it. And even after you digitize something, you still have to tweak it and fiddle around with it to get it just right. A big part of my business is cutting foam with my router for gun cases, and I use mine every day.

  4. #4
    Join Date
    Oct 2007
    Posts
    1010

    Re: Opinions on the Logic trace board

    that's exactly why I bought John Walsh's drawing board back in 2008, I did not like cad drawing and with all the other woodworking functions I had to do I could not get good enough
    working with cad, this system you use his board and software and a pen and you draw.
    The only decision is the size of board you require.

  5. #5
    Join Date
    Aug 2013
    Posts
    3

    Re: Opinions on the Logic trace board

    I have a 48x36 board. When I get an item longer than 4', I just digitize it in 2 pieces, and stitch them together in Aspire. The point being that you may not need one as big as you think.

  6. #6
    Join Date
    Oct 2007
    Posts
    1010

    Re: Opinions on the Logic trace board

    so one board would do, contact John Walsh ask him!
    Also your best source of diagrams....coloring books

  7. #7
    Join Date
    Nov 2013
    Posts
    152

    Re: Opinions on the Logic trace board

    I have a Logic Trace board. When you need it, it’s worth the cost!

Similar Threads

  1. logic trace curve fir through points
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 11-08-2018, 03:32 AM
  2. Buying logic trace
    By Rammer in forum Logic Trace CNC/DXF
    Replies: 1
    Last Post: 02-05-2015, 02:46 PM
  3. Replies: 0
    Last Post: 12-04-2014, 02:38 AM
  4. logic CNC trace please help !
    By UK SITE WELDER in forum Logic Trace CNC/DXF
    Replies: 3
    Last Post: 11-12-2014, 02:01 AM
  5. logic trace software and drawing boards
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 03-20-2014, 02:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •