584,802 active members*
4,769 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC Swiss Screw Machines > Star VNC 32 Overtravel in middle of travel
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2012
    Posts
    6

    Star VNC 32 Overtravel in middle of travel

    The X axis is alarming OT002 in the middle of the travel. It is a Fanuc 10. Any help is appreciated,.

  2. #2
    Join Date
    Apr 2012
    Posts
    85

    Re: Star VNC 32 Overtravel in middle of travel

    pfmn95492,
    You're sure your parameters for OT are set correctly?
    Two potential ways on a 10 control depending on sys software. 1) Hold "P" and "CAN" while powering up. You'll get no confirmation that it did anything until you move it and have no OT alarms.
    2) Need to get into IPL menu to shut off OT before Zero Return. Hold (-) and (.) while powering up and you will have the IPL menu. Look for "SETTINGS" (menu item 4??) , say "YES", exit and power up.

  3. #3
    Join Date
    May 2016
    Posts
    526

    Re: Star VNC 32 Overtravel in middle of travel

    Check your reference switches

  4. #4
    Join Date
    May 2012
    Posts
    6

    Re: Star VNC 32 Overtravel in middle of travel

    Apparently the X axis is slowly sinking when turned off. That's probably why it loses its position. Does anyone have any ideas what we'll need to fix to keep it from moving when off?

    Thanks

Similar Threads

  1. Star PU JR. Software Program Utility
    By cosmo2000 in forum CNC Swiss Screw Machines
    Replies: 0
    Last Post: 03-15-2018, 07:33 PM
  2. How to alter soft overtravel limits for second head on star sr-32j
    By Luke-H in forum CNC Swiss Screw Machines
    Replies: 2
    Last Post: 05-23-2016, 07:54 PM
  3. Lazy Cam not posting Fast Travel as Fast Travel
    By astainless in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 02-24-2010, 09:31 PM
  4. Middle NC
    By xclr82xtc in forum Mentors & Apprentice Locator
    Replies: 0
    Last Post: 07-02-2009, 11:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •