hi can sombody help me with programming g code, i only need a simple program to run a 3 axis milling machine. im getting stuck with G01 makinhg circles can sombody send me a program please and help explain how to do it
thank your time cody
hi can sombody help me with programming g code, i only need a simple program to run a 3 axis milling machine. im getting stuck with G01 makinhg circles can sombody send me a program please and help explain how to do it
thank your time cody
070703-0546 EST USA
cody:
G01 is a straight line motion from point 1 to point 2. You can approximate a circle with G01 with many short segments.
G02 and G03 are arc motions. If your machine has these use them.
Circular pocketing many be done with other G-codes.
www.haascnc.com
click on CUSTOMER SERVICE
click on MANUAL UPDATES
click on OPERATOR's MANUALS
under heading OPERATOR's MANUALS
may have to wait
click on MID-96-8000
The download file is 12 megabytes.
HAAS discusses their G-codes and show examples.
.