[noexit]

hello

My problem is this, I have a BMC2416 which when turned on says:
then i reinstall soft of hard drive fail i get error 128 time out on screen
same disk but on computer makes loading executables but then restart[email protected]

Primary Master Cyl 1223, 16 head, 63 Sector, Size 602MB

I found this instruction maybe some one have fdd imige or just copied disk into computer?

Ultimax CNC (Executive) Machine configuration disk 1 of 1
LC Ultimax Disk Upgrade Patch Rev A EXECUTIVE_1 (007-4123-010) disk 1 of 1
Ultimax Ultimax ultility Diskkette V1.05 (427-0004-023) disk 1 of 1
COMPOSITE FIELD Ultimax Machine Configuration Version 1.10 (427-0004-025) disk 1 of 2
COMPOSITE FIELD Ultimax Machine Configuration Version 1.10 (427-0004-025) disk 2 of 2
Ultimax Ultimax CNC version 2.15 (Maint. Executive) (007-4123-013) disk 1 of 3
Ultimax Ultimax CNC version 2.15 (Maint. Executive) (007-4123-013) disk 2 of 3
Ultimax Ultimax CNC version 2.15 (Maint. Executive) (007-4123-013) disk 3 of 3
Utlility Optikey Diskkette Software Option (007-4124-003) Rev B Ultipockets
Utlility Optikey Diskkette Software Option (007-4124-012) Rev F Ultinet
Utlility Optikey Diskkette Software Option (007-4124-001) Pkg Rev B 3D Mold
Utlility Optikey Diskkette Software Option (007-4124-007) Rev B
DXF
Utlility Optikey Diskkette Software Option (007-4124-008) Rigid Tap Rev B
Utlility Optikey Diskkette Software Option (007-4124-027) Rev H
UltiPro (std)
Security Diskkette Utlility Optikey Modifier (007-4136-005) Rev G SKCOX200
Max 32 DA DA Max32 Version 1.61 Software Package Machine configuration disk 1 of 1
Max 32 DA DA Max32 Version 1.61 Software Package (007-4123-002) ENG disk 1 of 3
Max 32 DA DA Max32 Version 1.61 Software Package (007-4123-002) ENG disk 2 of 3
Max 32 DA DA Max32 Version 1.61 Software Package (007-4123-002) ENG disk 3 of 3
Thanks in advance, they are grateful for the assistance or the time to read this, sorry again for my English

[cnc-exit]

I need mainly floppy imige i see that i missing some floppies

[email protected]
+37060022992

[bloke]

3303 Cyl
16 Head
65535 Wpcom
0 Lzone
63 Sect

[noexit]

Thanks Bloke
Only this was bad and needed this 4 numbers , and error code 128 that was hdd connected to secondary master on Motherbord.
https://youtu.be/bN9TOGNii54 <--- here is my 2.15 soft and manual how to install it is eazy

[mwalter34]

Hello, i have a Hurco VM1 with Ultimax Steuerung Version 2.33.29A / 2.02.10A
Serial No. VMX1-06215063AE
is it possible to get the disk
Utlility Optikey Diskkette Software Option (007-4124-001) Pkg Rev B 3D Mold
or other software update ?

[noexit]

Hello, i have a Hurco VM1 with Ultimax Steuerung Version 2.33.29A / 2.02.10A
Serial No. VMX1-06215063AE
is it possible to get the disk
Utlility Optikey Diskkette Software Option (007-4124-001) Pkg Rev B 3D Mold
or other software update ?

You must have sofware in FDD 1.44mb disk
it cost 1000-1500e from Hurco if your hard drive damaged then ask hurco for soft they will quotation for you.