584,800 active members*
4,533 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    Indicators Calibration

    Firstly, I'm sorry that my english is not good.
    I would like to post an article regarding indicators calibration

    Newly purchased indicators or after a period of use should be calibrated.

    The calibration performed

    Check out.
    Technical inspection and measuring force
    Check measurement: check total errors, component errors and error recovery; repeatability test.

    Environmental conditions

    When performing the calibration, the following conditions must be met:

    For comparison meters with a value of 0,001 mm; 0.002 mm:
    + Temperature: (20 ± 3) oC;

    + Humidity: (50 ± 15)% RH.

    For a meter with a value of 0.01 mm:
    + Temperature: (20 ± 8) oC;

    + Humidity: (50 ± 20)% RH.

    Calibration Device Clock So

    Gauge Blocks.
    Pillar heaps of lakes.
    Force measuring device with division value ? 0.02 N or scale meter with division value ? 2 g

    For more details, please refer to this article: https://www.techmaster.com.vn/blogs/...uan-dong-ho-so (sorry it's not translated into English yet)

  2. #2
    Join Date
    Aug 2020
    Posts
    1

    Re: Indicators Calibration

    I think all of thing you need, you can find it from here: https://tktech.vn/dong-ho-do-quy-trinh-fluke-726/

  3. #3
    Join Date
    Apr 2023
    Posts
    1

    Re: Indicators Calibration

    I think all of thing you need, you can find it from here: https://www.ndt-vn.com

  4. #4
    Join Date
    Jun 2023
    Posts
    2

    Re: Indicators Calibration

    Your information is much needed and I will look into it in the near future.
    getting over it

Similar Threads

  1. Mach 3 output indicators
    By Richster in forum Mach Wizards, Macros, & Addons
    Replies: 11
    Last Post: 11-05-2023, 09:06 PM
  2. Replies: 50
    Last Post: 04-04-2010, 06:33 PM
  3. Economic indicators - which do you use?
    By Chris D in forum Community Club House
    Replies: 13
    Last Post: 02-04-2006, 10:14 PM
  4. Proper use of dial indicators.
    By Cowbell in forum MetalWork Discussion
    Replies: 1
    Last Post: 01-23-2006, 11:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •