Re: Chinese cnc not square
Originally Posted by
Razrburn
I just purchased a Chinese cnc, it my first CNC, so I quickly found myself craving expensive software. I've since purchased hopefully all the software I'll ever need.
And now I'm finding flaws of a Chinese cnc
The work bed is t-slot aluminum. And isn't square to the Gantry ever so slightly with about .7mm difference over the span of 14"
I'm considering milling the t-slot into submission, it feels like there is or should be a better way. I'm hoping to get some advice from everyone
Googling "Chinese 3040 CNC" will show what machine I'm up against
Maybe try to adjust the screws of machine's feet.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html