Hi,
I'm trying to output some test code from SolidworksCAM for woodworking cnc machine Morbidelli Author with Xilog controller. Post processor can be found in CamWorks library, so I used it.
Thees woodwork CNC machines have coordinate systems placed "upside down" (rotated around X) that means origin is placed on far left corner and on the top face of workpiece and Z-axis is pointing downwards (like marked on picture):
Attachment 439828
How should I place coordinate system in SolidworksCAM? I was unable to place it in the same was as it is on machine, as it does not allow me to point Z direction downwards. Also I'm not sure if that would be the right solution, as in output g-code Z values are correct so I guess this "invert" is done by post processor. What is not correct in g-code are Y coordinates which also should be inverted in same way as Z is, if I place work coordinate system in SolidworksCAM like this:
Attachment 439830
Is there anyone with similar machine? OR someone who is capable of making this modification in post processor so Y coordinates would also be "inverted". Post processor I use is HERE.