[mopar1rules]

Hey guys. Years ago when our Toyoda BM850 (with Fanuc 18i-MB) was installed, I had the setup guys change a parameter, so the machine wouldn't slow the feed rate down when cutting a radius. Well now I would like to change that parameter back, so the machine does automatically slow the feed rate down during a radius move. I know I wrote that parameter down somewhere, but unfortunately that was like 17 yrs ago and I don't know where that was put. I've also searched through the booklets that came with the machine and can't find what I'm looking for. I searched the web some as well, but no luck. Any help is much appreciated.

[drdos]

I have no idea what it would be called but here is the parameter manual. Maybe if you scroll you will find it.

[mopar1rules]

Thank you drdos!! Hopefully I can find it in that manual. I thought our BM850 originally came with a parameter manual as well, but have no idea where that would have went.