[Kylizer]

I have an Anilam 3000M controller and it has been giving me some issues so I think it time to upgrade. While I have found a bunch of write up on all the combos I could use, I am not that familiar with all the terminology and what exactly replaces what on the console.
I know I dont have a ton of money to go out and buy centroid replacement, nor would I want to just because of the usage it will recieve, might not be much. Anyway I would say I have about $2000 to play with. I would like to be able to control the machine from my computer. I run a Shop Sabre CNC Plasma table with a WinCNC controller. I do most of my design in Enroute but I also play around with Aspire so I would be generating my tool paths in these programs.
I just want someone to tell me exactly what I need to upgrade this old Anilam console. I would like to keep all of my servo motors and electrical cabinet as there is nothing wrong with them I know it currently reads code in conversational format. Ive read that I may need to change some things so my sevo motors read step and direct instead of analog, again Im fairly new to alot of this on the cnc mill and so guidance would be awesome.
Mill is an Acer E-Mill fyi. 3 Axis