Hi everyone.

I have a problem with our Cincinnati Lamb HTC150. It's basically rebranded Hawk 150 with Fanuc 21i-TB control and Duplomatic sma-p-16 turret. So, what has happened:

Program was running and in meantime air line going to solenoid that locks turret indexing shotbolt had slipped from connector and started leaking air. Machine stopped when it tried to index the turret and couldn't lock it in place. I've heard the air hissing so I went to the back and fixed the air leak. The problem is that machine can't reference the turret anymore. Shotbolt locks and unlocks properly when I press buttons on the solenoids and spins when unlocked. I've tried manually spinning the turret to position 1 and it didn't help at all. We've also changed solenoids for new ones as we had spare but it didn't help.

I think it's just lost zero position and I don't know how to reset it.

It's popping following alarms when trying to reference or index manually:

1026 - TURRET UTILISATION ERROR
1030 - TURRET INTERFACE ERROR
1063 - TURRET ALIGN FAILURE
1064 - TURRET POSITIONING FAILURE

Any suggestions how to solve it? Thanks.