Hi Guys,
having troubles with my Hitachi Seiki VK45-2 with Seicos control. The control does not start up saying NUMC_BOARD_SYS_FAIL . Then it shows "table checksum failed". I assume that the problem is in control board and already called for a fellow guy who specialise in cnc controls but maybe some of you already have gotten such an error ?
Results 1 to 6 of 6
Threaded View
-
03-23-2020, 05:57 PM #1
Registered
- Join Date
- Jun 2015
- Posts
- 42
numc_board sys_fail . Error on Hitachi Seiki VK45-2
Reply With QuoteSimilar Threads
-
Hitachi Seiki VK45 with undeletable program
By The MACHINIST in forum Hitachi SeikisReplies: 10Last Post: 08-11-2023, 07:36 AM -
Drive Hitachi Seiki VK45 II
By firstreal in forum Hitachi SeikisReplies: 3Last Post: 01-14-2021, 03:52 PM -
Hitachi Seiki vk45
By davesnd in forum Mori Seiki MillsReplies: 0Last Post: 12-02-2010, 05:47 PM -
hitachi Seiki VK45 with Seicos II
By Dancy in forum CNC (Mill / Lathe) Control Software (NC)Replies: 7Last Post: 12-13-2007, 09:26 PM -
hitachi Seiki VK45 with Seicos II
By Dancy in forum Uncategorised MetalWorking MachinesReplies: 4Last Post: 12-11-2007, 09:16 PM
Tags for this Thread
Posting Permissions
