521,547 active members*
2,130 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    May 2010
    Posts
    86

    Omax Maxiem 1530

    I purchased a 2013 Maxiem 1530 this week and have a few questions if you have experience with this machine or similar:

    1) Omax says I need to remove the gantry prior to moving it and that generally I need to 'decommission' the machine, yet couldn't provide documentation for how to do this. The gantry looks fairly easy to remove, and I can start disconnecting everything to pack it but if you have other do's or don'ts, please let me know.
    2) Omax says I need to go through a process for setting the machine back up (leveling, laser setup of the gantry and/or machining head, etc), yet again they couldn't provide me with install docs. Any suggestions?
    3) Any online resources you can point me to which will enable me to tear down, move, setup, operate, and maintain the machine is much appreciated!

  2. #2

    Join Date
    Jan 2020
    Posts
    6
    Quote Originally Posted by HomerSimpson View Post
    I purchased a 2013 Maxiem 1530 this week and have a few questions if you have experience with this machine or similar:

    1) Omax says I need to remove the gantry prior to moving it and that generally I need to 'decommission' the machine, yet couldn't provide documentation for how to do this. The gantry looks fairly easy to remove, and I can start disconnecting everything to pack it but if you have other do's or don'ts, please let me know.
    2) Omax says I need to go through a process for setting the machine back up (leveling, laser setup of the gantry and/or machining head, etc), yet again they couldn't provide me with install docs. Any suggestions?
    3) Any online resources you can point me to which will enable me to tear down, move, setup, operate, and maintain the machine is much appreciated!
    Hi if the bridge isn't removed then the rails can get damaged during transit. Remove the bridge from the drain end of the tank as the controler side hard stops are factory set, this allows for correct setting and to square up the tank.
    I can discuss more if needed may be best via email.
    Thanks

  3. #3

    Join Date
    Feb 2020
    Posts
    3

    Re: Omax Maxiem 1530

    They don't make it easy. They are not lying when they tell you their is no real documentation on most of this stuff. do you know if this a generation 1 or generation 2 maxiem?

  4. #4
    Member
    Join Date
    Apr 2020
    Posts
    3

    Re: Omax Maxiem 1530

    is correct, you need to remove the bridge as well as free the X motors, you only need to disconnect a few cables from the bridge as well as the pneumatic connections, I can help you more b

Similar Threads

  1. OMAX 2652 Issue. Help?
    By DanielMartin2652 in forum General Waterjet
    Replies: 0
    Last Post: 07-06-2018, 11:38 AM
  2. MAXIEM 1530 code 2023
    By BCCameron in forum General Waterjet
    Replies: 0
    Last Post: 08-19-2015, 12:24 PM
  3. Just bought an Omax 2652
    By MBX5 in forum General Waterjet
    Replies: 12
    Last Post: 12-31-2014, 07:41 AM
  4. Maxiem series Waterjets by Omax
    By FAST LS1 in forum General Waterjet
    Replies: 3
    Last Post: 02-11-2014, 10:24 PM
  5. OMAX Files
    By steeler1933 in forum General Waterjet
    Replies: 6
    Last Post: 05-04-2010, 03:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •